Kit - Traditional Tricycle

• Proven, reliable modular system design for upright adult tricycles
• Hand-built wheel with 12-gauge stainless spokes & double-walled rim
• Full-color LCD with customizable speed limits & system settings

E-BikeKit 500W Direct-Drive Electric Conversion System for Upright Adult Tricycles.

This system is engineered specifically for upright tricycles that require predictable torque, stable low-speed handling, and long-term durability. The 500W direct-drive motor offers smooth acceleration and excellent reliability with no internal gears to wear out.

Who’s it for?
Ideal for upright trike riders who need added climbing power, smooth operation, and safe, predictable control. Top speed is approximately 18–20 mph with a real-world range of 15–45 miles depending on rider input and terrain.

Battery Mount: A battery-mounting system is available as a selectable variant option above.

Every Upright Trike Conversion Kit Includes:

• USA hand-built wheel with 500W direct-drive hub motor (disc-brake compatible)
• 48V compatible 22A 12FET brushless motor controller
• Programmable full-color LCD dashboard display
• 12-magnet PAS split disc
• PAS sensor – left-side mount (right-side mount by request)
• Split-twist throttle with integrated reverse button
• Left & right locking e-brake levers
• Main motor cable
• 3-to-1 accessory cable (4-to-1 available by request)
• Torque arm & C-washers for reinforced trike safety
• Battery wire harness (motor-only kits)
• Battery & charger (only when selected)
• Zip ties, mounting hardware, and installation essentials

Battery Mount: Included when the battery-mount variant is selected above.

• Brand: EBikeKit LLC
• Motor Type: Direct-drive (gearless, brushless, disc-brake compatible)
• Power Rating: 500W nominal / ~750–1000W peak @ 48V
• Cable Exit: 8″ axle exit, 3-phase / 5 Hall sensors
• Connector: Round 8-pin (~14.7 mm)
• Motor Weight: ~13 lb (5.9 kg)
• Front Dropout Spacing: 100 mm (upright trike standard)
• Reverse: Speed-limited (~30% of forward speed)

This system may be ordered with or without a 48V 15Ah lithium-ion battery pack.

• Range: 15–45 miles depending on rider, terrain, and assist level
• Charging Time: ~5 hours with 3A charger
• Nominal Voltage: 48V
• Nominal Capacity: 15Ah
• Energy: ~720Wh
• Total Weight: ~10.1 lb (4.6 kg)
• Cell Assembly: 18650 lithium cells, 13S4P
• Life Cycles: ~500–800
• Max Continuous Discharge: 16A
• BMS Protection: 20A
• Cutoff Voltage: ~37.5V
• Max Charge Voltage: 54.6V
• Operating Temp (Charge): 0°C–113°F
• Operating Temp (Discharge): −68°F–140°F
• Storage Temp: 0°C–104°F (59–77°F ideal)

If ordered without a battery, the kit does not include a battery or charger.

This upright trike conversion kit has been installed successfully by dealers nationwide for more than a decade. It is the same motor and battery configuration used on the complete Sun Traditional Electric Tricycle sold by ElectricTrike.com.

Comparable Complete Trike (ElectricTrike.com):
Sun Traditional Electric Tricycle — Complete Build

Important for dealers:
When consumers order this full trike directly from ElectricTrike.com, the delivered-to-door price includes a flat $300 freight charge. Dealers should keep this in mind when discussing the difference between a complete factory-built trike and a local conversion using this system.

Why Dealers Choose This System:

• Stable, predictable power for upright 3-wheel platforms
• Direct-drive reliability with no internal gears
• Safe, speed-limited reverse for maneuvering
• Ideal for seniors, mobility riders, and community-use trikes

Dealer Support Commitment:

• Real-time install support via phone, text, and email
• Direct access to system builders and wheel technicians
• Guidance on battery mounting based on selected variant
• Fast compatibility checks for any upright trike

Need help with a specific trike?
Send fork, dropout, and crank-area photos — we’ll confirm fitment and guide the install step-by-step.

This system is optimized for upright adult tricycles using a standard front-wheel platform.

Compatible With:

• 100 mm front dropout spacing
• Steel or reinforced aluminum tricycle forks
• Rim-brake or disc-brake setups

Not Compatible With:

• Thru-axle fork designs
• Cast aluminum forks not rated for motor torque
• Non-standard or specialty trike frames outside proper spacing

If you’re unsure, send us photos and we'll confirm the correct configuration.

This upright trike system installs with common tools and includes reinforced torque hardware for 3-wheel applications.

• Replace the front wheel with the motor wheel
• Install torque arms & torque axle nuts to spec
• Mount the controller, LCD, throttle, and e-brakes
• Install PAS disc and sensor (left-side standard)
• Mount the battery using the selected variant-based mount
• Route all wiring cleanly away from moving components

Correct torque-arm installation and secure battery mounting are essential for long-term safety.