SINET™ Torque Sensor Extension Cable – 59 cm

The SINET™ Torque Sensor Extension Cable adds 59 cm of cable length between a compatible SINET™ bottom bracket torque sensor and the SINET™ electrical system.

It provides additional reach for cleaner cable routing on larger bicycle frames, adult trikes, recumbent trikes, and other installations where the standard torque-sensor cable does not comfortably reach the system connection.

• 59 cm extension length
• Designed for SINET™ bottom bracket torque sensors
• Matched waterproof SINET™ connectors
• Useful for larger frames, trikes, and recumbents
• Supports cleaner routing with less connector strain
• Factory-terminated plug-and-play cable
• No product variants

Compatibility Notice: This extension cable is designed exclusively for the current E-BikeKit SINET™ bottom bracket torque-sensor system. It is not compatible with legacy E-BikeKit pedal-assist sensors, legacy wiring harnesses, cadence sensors, Rescue Pack systems, or third-party torque sensors.

The extension cable is used when additional distance is required between the bottom bracket torque sensor and the matching SINET™ connection.

Common applications include:

• Recumbent bicycles with long frame routing
• Tadpole and delta trikes
• Adult tricycles
• Large or unusually shaped bicycle frames
• Installations where the standard cable would be stretched or poorly routed

The additional length helps keep the cable away from chains, crankarms, steering components, tires, and other moving parts.

Compatible With:

• Current E-BikeKit SINET™ conversion systems
• Current E-BikeKit SINET™ complete trike systems
• SINET™ bottom bracket torque sensors
• SINET™ integrated-controller systems
• SINET™ external-controller systems

Not Compatible With:

• Legacy E-BikeKit pedal-assist sensors
• Legacy E-BikeKit wiring harnesses
• SINET™ cadence sensors
• Rescue Pack systems
• Third-party torque sensors or electrical systems

Matching connector shape alone does not confirm compatibility. Verify that the torque sensor and electrical system are both current SINET™ components before ordering.

• Platform: E-BikeKit SINET™
• Product Type: Bottom bracket torque-sensor extension cable
• Extension Length: 59 cm
• Sensor Compatibility: SINET™ bottom bracket torque sensor
• Connector Type: Matched waterproof SINET™ connectors
• Installation: Plug-and-play
• Variants: None

• One 59 cm SINET™ Torque Sensor Extension Cable
• Factory-installed waterproof connectors

• Disconnect the battery before installation.
• Connect only to a compatible SINET™ bottom bracket torque sensor.
• Align connector arrows and pins before joining the plugs.
• Do not twist, force, or partially connect the plugs.
• Route the cable away from the chain, crankarms, steering components, tires, and sharp edges.
• Leave enough slack for frame movement and steering without creating loose cable loops.
• Secure the cable with appropriate cable ties without placing strain on the connectors.

After installation, verify correct torque-sensor operation and proportional pedal assistance before returning the bicycle or trike to service.

• Provides additional routing length for trikes, recumbents, and larger frames
• Helps prevent stretched wiring and connector strain
• Direct replacement or installation accessory for SINET™ torque-sensor systems
• Phone, text, and email technical support
• Torque-sensor compatibility and routing guidance available

Dealer Note: This extension cable is specifically for the SINET™ bottom bracket torque sensor. It should not be supplied for cadence-sensor or legacy-system applications.