SINET™ Locking E-Brake Levers

The SINET™ Locking E-Brake Lever is a long-pull mechanical brake lever designed for current E-BikeKit SINET™ electrical systems.

Each lever combines normal mechanical braking with two additional functions: a parking-lock mechanism and an electrical motor cutoff that stops motor power when the brake lever is pulled.

• Available as Left, Right, or Pair
• Long-pull mechanical brake-lever design
• Integrated parking-lock function
• Integrated motor-cutoff switch
• 56 cm electrical cable on each lever
• Matched SINET™ electrical connector

Compatibility Notice: These brake levers are designed exclusively for current SINET™ systems. They are not compatible with previous-generation E-BikeKit brake-lever wiring, legacy harnesses, Rescue Pack systems, or third-party electrical systems.

Left Lever

• One left-side long-pull mechanical e-brake lever
• Integrated parking lock
• Integrated motor cutoff
• 56 cm electrical cable

Right Lever

• One right-side long-pull mechanical e-brake lever
• Integrated parking lock
• Integrated motor cutoff
• 56 cm electrical cable

Pair

• One left-side lever
• One right-side lever
• Parking lock and motor cutoff on both levers
• 56 cm electrical cable on each lever

• Mechanical Braking: Long-pull lever geometry for compatible mechanical cable-operated brake systems
• Parking Lock: Holds the brake lever in the applied position to help keep a trike stationary while parked
• Motor Cutoff: Sends a cutoff signal to the SINET™ controller when the brake lever is pulled

The parking lock is intended as a parking aid. It does not replace proper parking practices, wheel chocks where appropriate, or regular brake inspection and adjustment.

Compatible With:

• Current E-BikeKit SINET™ conversion systems
• Current SINET™ integrated controllers
• Current SINET™ external controllers
• Current SINET™ main wiring harnesses
• Compatible mechanical cable-operated brake systems

Not Compatible With:

• Legacy E-BikeKit brake-lever wiring
• Legacy E-BikeKit main harnesses
• Rescue Pack systems
• Third-party controllers or wiring systems
• Hydraulic brake systems
• Short-pull brake applications unless confirmed compatible

These are long-pull mechanical brake levers. Confirm that the brake system requires long-pull lever geometry before ordering.

• System: SINET™
• Brake Type: Mechanical cable-operated
• Lever Pull: Long pull
• Parking Lock: Included
• Motor Cutoff: Included
• Cable Length: 56 cm per lever
• Side Options: Left, Right, or Pair
• Electrical Connection: Matched SINET™ connector

Left Option:

• One left SINET™ locking e-brake lever
• Pre-installed 56 cm cutoff cable and connector

Right Option:

• One right SINET™ locking e-brake lever
• Pre-installed 56 cm cutoff cable and connector

Pair Option:

• One left SINET™ locking e-brake lever
• One right SINET™ locking e-brake lever
• Pre-installed 56 cm cutoff cable and connector on each lever

• Confirm the brake system uses mechanical cables and long-pull lever geometry.
• Install the correct lever on the left or right side of the handlebar.
• Connect the cutoff cable only to the matching SINET™ wiring harness.
• Adjust cable tension and brake operation before riding.
• Test the motor cutoff on both levers after installation.
• Test the parking-lock function before returning the trike to service.

Proper brake adjustment, cable routing, lever position, and motor-cutoff testing are essential for safe operation.

• Available individually or as a matched pair
• Useful for replacing a damaged lever without replacing both sides
• Parking-lock function is especially useful on adult trikes and recumbent trikes
• Phone, text, and email technical support available
• Compatibility and installation guidance available from system technicians

Dealer Note: Verify long-pull mechanical brake compatibility and confirm that the customer has a current SINET™ system before supplying these levers.