SINET™ Color LCD

The E-BikeKit SINET™ 3.5″ Color LCD is the current display used with the latest E-BikeKit SINET™ electrical platform.

It provides clear ride information, system status, assist-level control, diagnostics, and access to commonly used programming settings.

• 3.5″ full-color display
• USB charging port
• Battery level and voltage display
• Current speed, trip distance, and odometer
• Pedal-assist level selection
• Walk-assist mode
• Error diagnostics
• Advanced programming menu
• Compatible with current SINET™ cadence and torque-sensing systems

Compatibility Notice: This LCD is designed exclusively for the latest E-BikeKit SINET™ electrical system. It is not compatible with previous-generation E-BikeKit LCDs, legacy controllers, legacy wiring harnesses, Rescue Pack systems, or third-party electronics.

• Display Size: 3.5″
• Display Type: Full-color LCD
• USB Charging Port: Included
• Battery Information: Battery level and voltage
• Speed Information: Current speed, maximum speed, and average speed
• Trip Information: Trip distance and odometer
• Pedal Assist: Assist-level selection
• Walk Assist: Included
• Diagnostics: Error-code display
• Programming: Access to system settings and configuration menus

Watch the video below for an overview of the SINET™ LCD, including initial setup, programming, display operation, and commonly used system settings.

Watch the SINET™ LCD Programming Guide on YouTube

Download the SINET™ LCD quick-start guide for display operation, initial setup, programming, system settings, and commonly used functions.

Download the SINET™ LCD Quick-Start Guide (PDF)

Compatible With:

• Current E-BikeKit SINET™ conversion systems
• Current E-BikeKit SINET™ complete trike systems
• SINET™ integrated controllers
• SINET™ external controllers
• SINET™ main wiring harnesses
• SINET™ thumb throttles
• SINET™ locking e-brake levers
• SINET™ cadence sensors
• SINET™ bottom bracket torque sensors

Not Compatible With:

• Previous-generation E-BikeKit LCD displays
• Legacy E-BikeKit controllers
• Legacy E-BikeKit wiring harnesses
• Rescue Pack systems
• Third-party controllers or wiring systems

Matching connectors alone do not confirm compatibility. The LCD, controller, harness, sensors, throttle, and brake inputs must all be part of the SINET™ electrical platform.

• Brand: E-BikeKit
• Platform: SINET™
• Display: 3.5″ full-color LCD
• USB Charging Port: Included
• System Voltage: 48V SINET™ systems
• Controller Compatibility: SINET™ integrated and external controllers
• Pedal-Assist Compatibility: Cadence sensor or bottom bracket torque sensor
• Throttle Compatibility: SINET™ thumb throttle
• Brake-Cutoff Compatibility: SINET™ e-brake levers
• Connection: Matched SINET™ waterproof connector
• Mounting: Handlebar mounting hardware included

• E-BikeKit SINET™ 3.5″ Color LCD
• LCD control buttons
• Handlebar mounting hardware
• Pre-wired SINET™ connector

• Confirm the system uses current SINET™ electronics before ordering.
• Connect only to the matching SINET™ main wiring harness.
• Do not connect this LCD to legacy E-BikeKit controllers or wiring.
• Confirm wheel size, assist behavior, and system settings after installation.
• Use the programming video and PDF guide above for initial setup.

Incorrect settings may affect displayed speed, distance, assist behavior, or system operation.

• Phone, text, and email technical support
• LCD programming assistance
• Error-code and diagnostic support
• System compatibility guidance
• Direct access to system builders and technicians

Dealer Note: Confirm that the customer has a current SINET™ system before supplying this display. It is not a universal replacement LCD.